Llistar TÃtols
S'han trobat 136 Ãtems
Llistant Ãtems des de 50 a 75:
| Format | Data | TÃtol | Autor |
|---|
| Format | Data | TÃtol | Autor |
|---|
|
setembre 2008 |
Estudi de les propietats elà stiques i de fractura de teixits plans de fibra |
Vilà Grau, Carles
|
|
15 febrer 2020 |
Estudi de les propietats elà stiques i de fractura de teixits plans de fibra |
Vilà Grau, Carles
|
|
31 maig 2023 |
Evaluating the intralaminar tensile fracture behavior of composite materials under high rate loading through a combined experimental and numerical methodology |
Artero Guerrero, José Alfonso
|
|
|
31 maig 2023 |
Evaluation of a new experimental device for shear modulus measurement |
Berthe, Samuel
|
|
|
|
An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Costa i Balanzat, Josep
; Renart Canalias, Jordi
|
|
|
novembre 2016 |
An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Costa i Balanzat, Josep
; Renart Canalias, Jordi
|
|
|
31 maig 2023 |
Experimental building block approach and numerical modelling of thermoplastic composite used for fuselage panels |
Zaragkas, Thomas
|
|
|
31 maig 2023 |
Experimental characterization and numerical modeling of damages induced by low-velocity impacts in recent composite materials |
Laurin, Frédéric
|
|
|
11 juny 2015 |
Experimental characterization and numerical simulation of composite adhesive joints using the cohesive zone model approach |
Sarrado Molina, Carlos
|
|
|
|
Experimental characterization and numerical simulation of composite adhesive joints using the cohesive zone model approach |
Sarrado Molina, Carlos
|
|
|
|
An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Renart Canalias, Jordi
; Costa i Balanzat, Josep
|
|
|
29 setembre 2015 |
An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Renart Canalias, Jordi
; Costa i Balanzat, Josep
|
|
|
31 maig 2023 |
Experimental investigation of the loading rate dependency of the non-linear damageable behaviour of carbon/epoxy laminates |
Berthe, Julien
|
|
|
31 maig 2023 |
Experimental and numerical investigation on bearing behavior of hybrid thin/thick-ply composite laminates |
Loukil, Mohamed Sahbi
|
|
|
31 maig 2023 |
Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading |
Guerrero GarcÃa, José Manuel
|
|
|
31 maig 2023 |
Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading |
Snepsts, Alens
|
|
|
31 maig 2023 |
Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution |
Leciñana Arregui, Iñaki
|
|
|
31 maig 2023 |
Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests |
Carreras, Laura
|
|
|
|
Finite-thickness cohesive elements for modeling thick adhesives |
Sarrado Molina, Carlos
; Leone, Frank A.
; Turon Travesa, Albert
|
|
|
desembre 2016 |
Finite-thickness cohesive elements for modeling thick adhesives |
Sarrado Molina, Carlos
; Leone, Frank A.
; Turon Travesa, Albert
|
|
|
31 maig 2023 |
Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures |
Dulieu-Barton, Janice M.
|
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
|
|
|
31 maig 2023 |
Hybridisation of carbon and natural fibers for sustainable composites in automotive applications |
Corvo Alguacil, Marina
|
|
|
31 maig 2023 |
Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation |
Chandarana, Neha
|
|
|
31 maig 2023 |
Implementation of 3d nonlinear material model in finite element code |
Pupure, Liva
|
